| Type name / number: | Walther Comptess (S33-08) |
| Production / SN: | 2001951 1695883 |
| Calculating principle: | Rocking Segment |
| Calculating functions: | Add, Subtract |
| Input accuracy | 11 digits |
| Calculating accuracy: | 12 digits |
| Extra's: | |
| Designer: | |
| Production year: | between 1964 and mid seventies |
| Case material: | plastic case and botom plate |
| Weight: | 7,1 kg |
| External links: | http://www.rechenkasten.de/Walther/Company/ http://www.rechnerlexikon.de/upload/5/51/Aufsatz-Walther-Geh%E4useformen-2011-03.pdf |
| Previous owner: | An collector, Overijsel, The NetherlandsGermany |
| Cosmetic imperfections: (I accuse no one) |
Nearly non. |
| Date of receiving: | 2015 march. Picked up at the previous owner together with 6 other machines |
| Machine story: | 2015-03-25 All my three old type Comptess machines had the same failure at receiving, they continuing run an instruction cycle. The handle, who normally stopped the motor controlled by the main axis, blocked at the turning point, near the bottom plate of the machine. A plastic kind of ring is wear out and nearly disappeared, but rest material is creeping in to the bearing. In the cleaning process now. The axis is turning now more easily in the chassis and not the bearing its self. Have to wait for the penetrating oil. The machine adding is correct see the printed list. 2015-03-26 The bearing is, with normal force, not to get moving again, so I trusted that the turning in the chassis is doing the job and I extra oiled it there. Please see the pictures. |
Content without guarantee! (UK); Inhalt Ohne Gewähr! (DL)